Combination & TSA Lock Instructions

GENERIC COMBINATION LOCK INSTRUCTIONS

INSTRUCTIONS FOR GENERIC COMBINATION LOCK TYPE 1

To set your personal combination please follow the steps below:

  1. Set Default combination to 0-0-0 (if resetting, set to current combination)
  2. Push in button and hold (used to release zipper pulls)
  3. While holding button in, set your personal combination by turning the dials (For example: 1-2-3)
  4. Release button when you are done to lock in your new combination

Now your personal combination is set
(If you need to change the combination please repeat steps 1- 4)

PLEASE READ BEFORE USING TSA LOCK. REMEMBER YOUR COMBINATION!

(Warning: Do not press in reset button if you do not remember your combination. It cannot be reset without correct combination!)

INSTRUCTIONS FOR GENERIC COMBINATION LOCK TYPE 2

To set your personal combination please follow the steps below:

  1. Set Default combination to 0-0-0 (if resetting, set to current combination)
  2. Pull button to release zipper pulls, then pull and hold button
  3. While holding button in, set your personal combination by turning the dials (For example: 1-2-3)
  4. Release button when you are done to lock in your new combination

Now your personal combination is set
(If you need to change the combination please repeat steps 1- 4)

PLEASE READ BEFORE USING TSA LOCK. REMEMBER YOUR COMBINATION!

(Warning: Do not press in reset button if you do not remember your combination. It cannot be reset without correct combination!)

TSA LOCK INSTRUCTIONS

INSTRUCTIONS FOR COMBINATION TSA LOCKS ON THE FOLLOWING MODELS:
– TC09027 & TC06048 Maxporter Trunk Luggage (Below)
– TC5000 Tasmania & TC8000 Sedona Spinners (Scroll further down below)

PLEASE READ BEFORE USING TSA LOCK. REMEMBER YOUR COMBINATION!

(Warning: Do not press in reset button if you do not remember your combination. It cannot be reset without correct combination!)

INSTRUCTIONS FOR TSA KEY LOCKS ON THE FOLLOWING MODELS:
– PK06018 Prokas Ultimax Trunk Spinner (1st Generation)
– PK09044 Prokas Ultimax Wide Body Spinner
– PK09045 Prokas Ultimax Spinner Luggage

PLEASE READ BEFORE USING TSA LOCK. REMEMBER TO BRING YOUR KEY

FOR MODELS TC09027 & TC06048 Maxporter Rolling Trunk Luggage

1. The default combination is 0-0-0.

2. To Open the lock, slide the key hole slider to the right (Default combination will be 0-0-0).

3. Locate the reset button (silver dot right of combination dial). Press in the reset button with a pen/pin, until you hear a  “click” sound.

4. Set your personal combination by turning the combination dials to desired number (For example: 1-2-3).

5. Slide the keyhole slider to the right until you hear a “click”. Make sure not to have the zippers locked in during this process.

FOR MODELS TC5000 Tasmania & TC8000 Sedona Spinners

To set your personal combination please follow the steps below:

  1. Open the lock (Original combination will be 0-0-0).
  2. Press in the reset button with a pen (this is located on the bottom right of the lock, you will see a small dot size protrusion) all the way until you hear a “click” sound.
  3. Set your personal combination by turning the dials (For example: 1-2-3).
  4. Slide the button rightward to the open position to allow the reset button to return back.

Now your personal combination is set. If you need to change the combination please
repeat steps 1- 4.